The Official Website of Ontario, California
 
 
 
ENGINEERING
 
 
 
   
Home » Departments » Engineering » Design Guidelines & Requirements » Standard Drawings Water
 

Water

 

 

TITLE
STANDARD DRAWINGS
NUMBER
Protection of Water Lines from Sanitary Sewer
Steel Pipe Joints
Minimum Pipe Welding Lengths
Thrust Blocks
Gate Valve and Box
Butterfly Valve and Box
Relocation of Water Main and Fire Hydrant Laterals (Condition 1)
Relocation of Water Main and Fire Hydrant Laterals (Condition 2)
Thermite Braze Detail
Standard Restraint Tees, Dead Ends, and Bends for PVC
NMC Typical Water Crossing and Restraint Detail Less Than 10' in Depth 

4011

NMC Typical Water Crossing and Restraint Detail More Than 10' in Depth

4012

Fire Hydrant w/Break-Off Check Valve
2" and Smaller Air Release and Vacuum Relief Valve Assembly
Blank
4103
3" and 4" Air Release and Vacuum Relief Valve Assembly
Blank
4105
Hot Tap Detail
4" Blowoff
Temporary Disinfection Air Relief or Blowoff Assembly
6" and 8" Blowoff
Valve Operator Extension
6" Fire Hydrant Installation (PVC Pipe)
4" Blowoff Assembly (PVC Pipe)
NMC Temporary Dead-End 4" Blowoff
1" Water Service
2" Water Service
3" and 4" Water Service Meter
6" and 8" Water Service Meter Service
Blank
4205
Backflow Prevention Assembly 2" & Smaller - Reduced Pressure Device

Backflow Prevention Assembly 3" & Larger - Reduced Pressure Device
Fire System Double Check Detector Assembly
Meter Cluster Using 4" Manifolds
1" Water Service Detail   (PE Tubing) (PVC Pipe)
2" Water Service Detail   (PE Tubing) (PVC Pipe)
Pipe Tracer Wire for Non-Conductive Water Mains
Allowable Methods for Fire Hydrant Connections
Pavement Markers at Fire Hydrant
Protector Posts
Water Sampling Station
1" Temporary Hydrostatic Pipeline Testing Installation
Cathodic Protection Test Station 
Pipe Support Detail 

 
   
City of Ontario - Copyright 2008